Codes for this model are listed below. The
features on Model 8434 are more enhanced but very similar to
this phone. If you are experiencing any problems with your
phone, please contact
helpdesk@caryacademy.org.
The Line button above refers to your extension. This
number will vary from phone to phone. The phones without a
display will have two instances of the extension. The top
two instances of your extension will be available for
incoming and outgoing calls. The third instance of your
extension will be exclusively for outgoing calls.
If you are a department contact, you may have line status
of various people in your department. The basic features of
the phone, however, will remain the same.
|
|
Procedure
|
|
- Connect with the first
party
- Press the conf button
- Dial the number of the
new party
- Once the party answers,
press conf again.
- Repeat the process to
add additional parties.
|
|
Conferencing Two Held
Calls
|
|
- Connect with the first
line
- Press the conf button
- Press the line of the
held call
- Then press conf again.
|
Removing the Last Party
|
 |
- Press the drop button.
You will only be able to drop the party last
added.
|
|
|
|
|
- Press the hold button.
- You may answer a new
call or conduct other business
- To return to the held
call, press the appropriate line button
|
|
|
|
 |
To send a present call to
another extension or outside number:
- Press the transfer
button
- Dial the number where
the call is to be transferred.
- You may announce the
call if you wish.
- Then, press transfer
again.
- Hang up.
|
|
|
|
 |
To automatically dial the
last number you called:
- Press the feature code
*9
- Or, you may use the
menu feature Last
|
|
|
|
|
 |
Sends all calls to
coverage.
- Press send calls (SAC),
if available.
- If not, press the
access code *3.
|
Canceling Send All Calls
|
 |
To cancel Send All Calls:
- Press Send Calls, if
available
- If not, press #3
|
|
|
|
REPEAT
|
To select a
personalized ring:
- Press Shift
- Then, press hold
- Your current ring will
play
- To cycle through all 8
ring patterns, continue to press and release hold.
- If you have a display,
you may use the next or prev buttons to cycle
through the patterns
- When you hear the
desired ring pattern, press Shift again.
|
|
|
|
To listen to a call without
lifting the handset:
- Press Speaker
- Place or answer the
call, or access selected feature.
- Adjust speaker volume
if necessary using the volume button (left side to
lower, right side to raise volume)
|
|
|
|
To prevent the other party
from hearing you:
- Press the mute button.
- To disengage the mute
feature, press mute again.
|
|
|
|
To adjust the volume, use
the volume button. Pressing the right side of the
button raises the volume. The left side lowers volume. |
|
|
|
To place or answer a call
without lifting the handset:
- Press Speaker
- Place or answer the
call, or access selected feature.
- Adjust speaker volume
if necessary using the volume button (left side to
lower, right side to raise volume)
|
|
|
|
To prevent the other party
from hearing you:
- Press the mute button.
- To disengage the mute
feature, press mute again.
|
Reset Speakerphone
|
|
To adjust the speakerphone
to the surrounding room acoustics:
- While on hook, press
Shift
- Then press Speaker
- You will hear a series
of tones.
|
|
|
|
|
The drop
function is quite useful.
- If you are dialing a
call and make an error, press drop for a a dial
tone.
- If you would like to
remove the last added party in a conference call,
press drop.
- If you would like to
end a call and place another without replacing the
handset, press drop.
|
|
|
|
The Shift
button adds increased functionality to your Lucent
Phone. Some operations such as ringer volume
adjustment, reset of the speakerphone and others may
require you to use the shift button. |
|
|
|
 |
This button is
reserved for telecommunications use. |
